{"product_id":"kt-h105-two-post-automotive-lift-10-000-lb-capacity-hydraulic","title":"Katool KT-H105 Two-Post Automotive Lift 10,000 lb Capacity Hydraulic","description":"\u003cp\u003eThis two-post automotive lift offers a ten-thousand pound rated capacity suitable for light and medium duty vehicles. Heavy-gauge steel columns and crossbeam deliver structural rigidity and long-term serviceability. Dual hydraulic chain-drive cylinders provide synchronized lifting and controlled descent. The hydraulic power unit operates on 220VAC\/60Hz\/1PH with a 2.2 kW motor for consistent performance. An optional 110VAC\/60Hz single-phase power unit is available as a paid add-on for alternate power environments. Manual safety release is accessible from both sides to simplify lowering and emergency operations. Screw-on lift pads and extension adaptors enable secure contact points for varied vehicle lift points. Rubber pad door-opening protection reduces contact damage to vehicle bodies during positioning. Arm geometry provides a front reach range of 29.5 to 46 inches to accommodate varying chassis widths. Rear arm reach extends from 29.5 to 49.2 inches to support longer wheelbases and wider vehicles. Maximum lifting height is 70.8 inches, providing ample access for undercarriage inspection and repairs. Minimum lift height of 3.9 inches facilitates tire and underbody work at low clearance. Overall height and footprint measurements guide garage layout and door clearance planning. Drive-through clearance of 98.4 inches accommodates vehicles with elevated ride height in wide-bay setups. The unit is CE approved and tested to 115% dynamic and 150% static loading capacity per the manufacturer's conformity statement. Installers must verify concrete slab thickness of at least 5.9 inches and 3000 PSI compressive strength prior to anchoring. Correct anchor placement on a level slab and specified torque values are critical to maintain alignment and safety. Regular inspection of chains, cylinder seals, and anchor hardware reduces service interruptions and extends component life. Maintenance intervals should include hydraulic fluid checks, fastener torque verification, and pad condition assessment. The base plate design simplifies floor mounting and helps distribute loads into the slab. A clear maintenance access path around the columns speeds routine service and safety checks. Freight delivery planning is required; this product ships freight-only within the contiguous United States. Buyers are responsible for unloading from the delivery truck and should plan forklift or dock services when necessary. Residential delivery and re-delivery may incur additional carrier charges. Operators must follow vehicle-specific lift point charts and balance load distribution across arms. Per-arm load limits must be observed to prevent overstressing individual lift arms during asymmetric lifts. The supply package includes standard pads, extension adapters (+100 mm), and mounting hardware required for assembly and basic operation. Technical documentation and service guidance are provided with the unit and should be retained for future reference. Proper training on safe lift operation and periodic shop procedure certification will improve workshop safety and uptime.\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-contrast=\"none\" lang=\"EN-US\" class=\"TextRun SCXW140159626 BCX0\"\u003e\u003cspan class=\"NormalTextRun SCXW140159626 BCX0\"\u003e\u003cspan color=\"#ff2a00\"\u003e\u003cb\u003e*Concrete thickness must be at least 5.9” (150 MM) with a 3000 PSI rating. Failure to install this lift on the proper concrete could result in serious injury or death! It is the customer’s responsibility to verify concrete thickness and strength before purchase and installation.\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"EOP SCXW140159626 BCX0\" data-ccp-props='{\"201341983\":0,\"335559739\":160,\"335559740\":259}'\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHigh-strength welded steel construction, powder-coated finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLifting capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10,000 lb (4,500 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax lifting height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e70.8 in (1800 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.9 in (100 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOverall height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e110.9 in (2818 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOverall width (footprint)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e140.4 in (3565 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrive-thru clearance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e98.4 in (2500 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eArm reach (front)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e29.5–46 in (750–1170 mm), 2-stage arms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eArm reach (rear)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e29.5–49.2 in (900–1480 mm), 2-stage arms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMotor \u0026amp; power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e220VAC\/60Hz\/1PH, 2.2 kW; 110VAC\/60Hz optional add-on (additional cost)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 data-end=\"172\" data-start=\"124\"\u003eUnderstanding Two-Post Lift Weight Capacities\u003c\/h2\u003e\n\u003cp data-end=\"248\" data-start=\"174\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003eTwo-post lifts are essential in automotive shops, but selecting the appropriate lift with the correct weight capacity is crucial for safety and equipment longevity.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 data-end=\"279\" data-start=\"250\"\u003eTypical Weight Capacities\u003c\/h3\u003e\n\u003cp data-end=\"475\" data-start=\"281\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003eTwo-post lifts generally have weight capacities ranging from 7,000 to 20,000 pounds, accommodating various vehicles from light-duty cars to heavy-duty trucks.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003eIt's important to note that each lift arm also has its own weight limit.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003eFor instance, a lift with a 10,000-pound total capacity may have each arm rated for 2,500 pounds.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003eTherefore, if a vehicle's weight distribution exceeds this per-arm limit, the lift may not be suitable.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 data-end=\"515\" data-start=\"477\"\u003eCalculating Required Lift Capacity\u003c\/h3\u003e\n\u003cp data-end=\"560\" data-start=\"517\"\u003eTo determine the appropriate lift capacity:\u003c\/p\u003e\n\u003col data-end=\"822\" data-start=\"562\"\u003e\n\u003cli data-end=\"636\" data-start=\"562\"\u003e\n\u003cp data-end=\"636\" data-start=\"565\"\u003e\u003cstrong data-end=\"595\" data-start=\"565\"\u003eCalculate Rear Axle Weight\u003c\/strong\u003e:\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003eMultiply the vehicle's total weight by the distance from the center of gravity to the front axle, then divide by the wheelbase.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"712\" data-start=\"637\"\u003e\n\u003cp data-end=\"712\" data-start=\"640\"\u003e\u003cstrong data-end=\"671\" data-start=\"640\"\u003eCalculate Front Axle Weight\u003c\/strong\u003e:\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003eSubtract the rear axle weight from the total vehicle weight.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"822\" data-start=\"713\"\u003e\n\u003cp data-end=\"822\" data-start=\"716\"\u003e\u003cstrong data-end=\"742\" data-start=\"716\"\u003eDetermine Arm Capacity\u003c\/strong\u003e:\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003eDivide each axle's weight by two to find the load per arm.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp data-end=\"982\" data-start=\"824\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003eFor example, if a vehicle weighs 9,000 pounds with a 3,000-pound front axle and a 6,000-pound rear axle, each arm would need to support 3,000 pounds.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003eIn this case, a 10,000-pound lift with 2,500-pound arms would be insufficient.\u003c\/span\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003eOpting for a 12,000-pound lift would be safer.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 data-end=\"1040\" data-start=\"984\"\u003eImportance of Choosing a Lift with Adequate Capacity\u003c\/h3\u003e\n\u003cp data-end=\"1200\" data-start=\"1042\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003eSelecting a lift with a capacity that exceeds the vehicle's weight requirements is advisable.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003eThis accounts for variables like vehicle modifications, additional equipment, or unexpected weight distributions.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003eMany manufacturers recommend not exceeding 75% of a lift's rated capacity to maintain safety margins.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 data-end=\"1230\" data-start=\"1202\"\u003eSafe Operating Practices\u003c\/h3\u003e\n\u003cul data-end=\"1482\" data-start=\"1232\"\u003e\n\u003cli data-end=\"1302\" data-start=\"1232\"\u003e\n\u003cp data-end=\"1302\" data-start=\"1234\"\u003e\u003cstrong data-end=\"1261\" data-start=\"1234\"\u003eAdhere to Weight Limits\u003c\/strong\u003e:\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003eNever exceed the lift's total or per-arm weight capacities.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1376\" data-start=\"1303\"\u003e\n\u003cp data-end=\"1376\" data-start=\"1305\"\u003e\u003cstrong data-end=\"1335\" data-start=\"1305\"\u003eProper Vehicle Positioning\u003c\/strong\u003e:\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003eEnsure the vehicle is centered and balanced on the lift to distribute weight evenly.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1482\" data-start=\"1377\"\u003e\n\u003cp data-end=\"1482\" data-start=\"1379\"\u003e\u003cstrong data-end=\"1402\" data-start=\"1379\"\u003eRegular Maintenance\u003c\/strong\u003e:\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003eFollow the manufacturer's maintenance schedule and conduct routine inspections to identify potential issues.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"1562\" data-start=\"1484\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003eBy understanding and respecting the weight capacities and operational guidelines of two-post lifts, automotive shops can ensure safer working conditions and prolong the lifespan of their equipment.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eShipping Coverage\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFreight shipping only\u003c\/strong\u003e within the \u003cstrong\u003elower 48 states\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFulfillment times are 6-10 business days.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e applies to: Tire Changers, Tire Balancers, Shop Tool Equipment, and Scissor Lifts → delivered to \u003cstrong\u003ecommercial addresses\u003c\/strong\u003e or the nearest carrier terminal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Post and Four-Post Lifts\u003c\/strong\u003e: Customer must provide a \u003cstrong\u003eforklift\u003c\/strong\u003e for unloading. Please make sure to select the correct shipped or pick up option BEFORE ADDING THE ITEM TO YOUR CART. If no forklift is available, we can arrange \u003cstrong\u003eterminal delivery for pick-up\u003c\/strong\u003e instead.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eAdditional Services \u0026amp; Fees\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eResidential Delivery\u003c\/strong\u003e: $100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiftgate Service\u003c\/strong\u003e: $100 \u003ci\u003e(not available for two \u003c\/i\u003epost, four posts, and select scissor lifts\u003ci\u003e; contact us to confirm before ordering)\u003c\/i\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eCustomer Responsibilities\u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eCustomers are responsible for unloading freight from the truck.\u003c\/li\u003e\n\u003cli\u003eA forklift or unloading dock service is strongly recommended.\u003c\/li\u003e\n\u003cli\u003eCustomers are responsible for any \u003cstrong\u003ere-delivery fees\u003c\/strong\u003e if the carrier cannot complete delivery.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not sign\u003c\/strong\u003e for damaged or incomplete shipments. Contact Customer Service immediately if items are missing or damaged.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cdiv class=\"accordion-title\"\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"accordion-content active\"\u003e\n\u003cp\u003eFor more detailed information and guidance, you can download the following:\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Katool KT-H105 Two Post Vehicle Lift 10,000lbs\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0091\/8988\/3964\/files\/Katool-KT-H105-Two-Post-Vehicle-Lift-Manual.pdf?v=1767038305\"\u003eDownload Manual (PFD)\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Katool","offers":[{"title":"Default Title","offer_id":51721068806445,"sku":"KT-H105","price":2199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/8988\/3964\/files\/katool-kt-h105-two-post-automotive-lift-10-000-lb-capacity-hydraulic-753.png?v=1767038769","url":"https:\/\/garagecabinetsonline.com\/products\/kt-h105-two-post-automotive-lift-10-000-lb-capacity-hydraulic","provider":"Garage Cabinets Online","version":"1.0","type":"link"}