Katool KT-4H850 8,500 lb Four-Post Car Lift Heavy-Duty Garage Parking Lift

Designed for commercial and serious home garages, this four-post lift delivers a rated 8,500 lb lifting capacity for elevated storage and vehicle maintenance. The lift uses a hydraulic drive with a 110 VAC / 60 Hz / 1 PH motor and an optional 220 VAC configuration for compatibility with workshop power systems. Non-skid diamond platforms and adjustable safety lock ladders provide stable vehicle positioning and incremental locking points during service. Four mechanical locking devices plus a slack-cable secondary lock and single-point manual safety lock release enhance mechanical redundancy and service safety. Power-side column placement is configurable to front or rear to suit shop layouts and workflow. Dimensions accommodate most cars and light trucks with a 70.87 in maximum lift height and inside column clearance of 94.72 in. Concrete installation requires at least 3.93 in thickness (100 mm) with a minimum 3,000 PSI rating; correct substrate verification is the buyer’s responsibility. The unit ships with a caster kit for repositioning, three drip trays, and a dedicated jack tray to support routine service tasks. Overall footprint and ramped length enable long-term parked storage while maintaining access to the underside for inspection and repairs. CE certification and static/dynamic load testing are documented to the manufacturer’s stated standards for this model.
*Concrete Requirements: Ensure a minimum concrete thickness of 3.93 inches (100 mm) with a 3,000 PSI rating. Failure to meet these requirements could result in serious injury or equipment failure. It is the customer's responsibility to verify concrete specifications before purchase and installation.

Features

• 8500lbs lifting capacity. 

• CE Approved and Certified. It has adopted the 115% dynamic loading capacity standard and was 150% static loading capacity tested.

• Single Point Manual Safety Lock Release

• Four mechanical locking devices, a secondary lock system acts as a slack-cable device to engage in the unlikely event of cable failure.

• Power side column can be installed at both sides, front or rear.

• Non-skid diamond platforms and adjustable safety lock ladders.

• Comes with a caster kit for moving the lift around.

• Comes with three drip trays and a jack tray.

• High-quality hydraulic system with 110V/60HZ/1PH or 220V/60HZ/1PH (Optional)

Specifications