in stock
Katool KT-B700 Wheel Balancer 120V Heavy-Duty 180RPM Precision Machine
over $250
100% Satisfaction
Guarantee
Authorized
Dealer
Guarantee SAFE Checkout
Heavy-duty 0.12 in steel construction with solid welding minimizes vibration and preserves alignment during balancing. Dual 0.31 in thick base and side plates contain an integrated pressure sensor for stable, repeatable measurements. A top-grade motor with pure copper windings delivers 0.25 kW of continuous power with efficient heat dissipation. The unit runs at 180 RPM and completes most static balance cycles in about 7 seconds. A quenched 1.42 in shaft thread and extended-shaft option accommodate wider wheels and larger rim center holes. Supports rim diameters up to 30 in, wheel widths from 3 in to 12 in, and wheel diameters up to roughly 34.6 in. Capacity handles wheel assemblies up to approximately 143 lb with balancing accuracy to ±1 g for precise weight placement. Onboard controls include multiple balance modes, ounce/gram and inch/mm unit selection, fault diagnosis and self-calibration. Optional wheel guard and moisture- and dust-resistant PCB construction improve long-term reliability. Freight shipping and commercial delivery are recommended; forklift or dock service is advised for safe unloading.
Features
- The body uses 3mm-thick steel with high strength, solid welding and low vibration
- All-in-one pressure sensor support design, both bottom and side boards are 8mm thick, and it insures that the sensor work stably with high precision
- Top level motor and pure copper winding provides more power, faster heat dissipation, lower defect rate and longer using life
- The 36mm shaft thread is made by quenching treatment to offer high strength
- The computer board adopts advanced welding technology to make it moisture proof, dust proof and antistatic
- Various balance mode for different types of rims to provide more precision
- Built-in fault diagnosis and self-calibration program with double side calibration. No preset parameters so the users can operate with ease
- Unit selection (Ounce/Gram, MM/Inch)
- High quality integration power board, working stable and reliable
- Optional wheel guard
- Longer shaft also compatible with wider wheels
Specifications
| Construction | 0.12 in thick steel body with solid welded frame |
| Base and Side Plate Thickness | 0.31 in thick plates with integrated pressure sensor |
| Motor | 0.25 kW motor with pure copper windings |
| Power Supply | 120V, single-phase (1PH) |
| Balancing Speed | 180 RPM |
| Wheel Width Range | 3 in to 12 in |
| Maximum Rim Diameter | Up to 30 in |
| Maximum Wheel Diameter | Up to 34.6 in |
| Maximum Wheel Weight Capacity | Up to 143 lb |
| Accuracy and Cycle Time | ±1 g accuracy; measurement time approximately 7 seconds |
Warranty
Katool offers a limited one-year (12 months) warranty on all parts and against all product defects, free of charge.
A 2-year extended warranty plan is available for any Katool or M&E automotive equipment.
Warranty Includes:
- Cylinders, power units, motors, displays, electronics, etc.
- Vehicle lifts include an additional three-year (36 months) warranty on structural components only.
Warranty Conditions:
- Claims must fall within the warranty period.
- Warranty is non-transferable and requires the original order number and purchase from our company or a registered vendor.
- Replacement parts will be provided at no cost, including free shipping.
Note:
- All warranty claims are subject to approval by the warranty/service department.
- Photos and/or videos of defects may be requested.
- Do not disassemble any equipment before the issue is determined.
- Equipment outside the warranty policy will not be covered, and the buyer will be responsible for replacement parts and shipping costs.
- Labor is not included in the warranty.
Resources
For more detailed information and guidance, you can download the following:
Heavy-duty 0.12 in steel construction with solid welding minimizes vibration and preserves alignment during balancing. Dual 0.31 in thick base and side plates contain an integrated pressure sensor for stable, repeatable measurements. A top-grade motor with pure copper windings delivers 0.25 kW of continuous power with efficient heat dissipation. The unit runs at 180 RPM and completes most static balance cycles in about 7 seconds. A quenched 1.42 in shaft thread and extended-shaft option accommodate wider wheels and larger rim center holes. Supports rim diameters up to 30 in, wheel widths from 3 in to 12 in, and wheel diameters up to roughly 34.6 in. Capacity handles wheel assemblies up to approximately 143 lb with balancing accuracy to ±1 g for precise weight placement. Onboard controls include multiple balance modes, ounce/gram and inch/mm unit selection, fault diagnosis and self-calibration. Optional wheel guard and moisture- and dust-resistant PCB construction improve long-term reliability. Freight shipping and commercial delivery are recommended; forklift or dock service is advised for safe unloading.
Features
- The body uses 3mm-thick steel with high strength, solid welding and low vibration
- All-in-one pressure sensor support design, both bottom and side boards are 8mm thick, and it insures that the sensor work stably with high precision
- Top level motor and pure copper winding provides more power, faster heat dissipation, lower defect rate and longer using life
- The 36mm shaft thread is made by quenching treatment to offer high strength
- The computer board adopts advanced welding technology to make it moisture proof, dust proof and antistatic
- Various balance mode for different types of rims to provide more precision
- Built-in fault diagnosis and self-calibration program with double side calibration. No preset parameters so the users can operate with ease
- Unit selection (Ounce/Gram, MM/Inch)
- High quality integration power board, working stable and reliable
- Optional wheel guard
- Longer shaft also compatible with wider wheels
Specifications
| Construction | 0.12 in thick steel body with solid welded frame |
| Base and Side Plate Thickness | 0.31 in thick plates with integrated pressure sensor |
| Motor | 0.25 kW motor with pure copper windings |
| Power Supply | 120V, single-phase (1PH) |
| Balancing Speed | 180 RPM |
| Wheel Width Range | 3 in to 12 in |
| Maximum Rim Diameter | Up to 30 in |
| Maximum Wheel Diameter | Up to 34.6 in |
| Maximum Wheel Weight Capacity | Up to 143 lb |
| Accuracy and Cycle Time | ±1 g accuracy; measurement time approximately 7 seconds |
Warranty
Katool offers a limited one-year (12 months) warranty on all parts and against all product defects, free of charge.
A 2-year extended warranty plan is available for any Katool or M&E automotive equipment.
Warranty Includes:
- Cylinders, power units, motors, displays, electronics, etc.
- Vehicle lifts include an additional three-year (36 months) warranty on structural components only.
Warranty Conditions:
- Claims must fall within the warranty period.
- Warranty is non-transferable and requires the original order number and purchase from our company or a registered vendor.
- Replacement parts will be provided at no cost, including free shipping.
Note:
- All warranty claims are subject to approval by the warranty/service department.
- Photos and/or videos of defects may be requested.
- Do not disassemble any equipment before the issue is determined.
- Equipment outside the warranty policy will not be covered, and the buyer will be responsible for replacement parts and shipping costs.
- Labor is not included in the warranty.
Resources
For more detailed information and guidance, you can download the following: