https://cdn.shopify.com/s/files/1/0646/1217/2012/files/150D.png?v=1759129827
Click to enlarge
Save 23% Today

in stock

Katool KT-M150D 15,000 lb Two-Post Car Lift

Vendor: KATOOL
SKU: KT-M150D
free-shipping
on Orders
over $250
$5,999.00 $4,599.00
Order Today & Save! Price going up soon.

logo
YOUR #1 TRUSTED SOURCE FOR GARAGE CABINETS AND STORAGE
logo

Have a Question? Ask a Specialist 1-800-960-8341

Always a Human to Call

logo

100% Satisfaction
Guarantee

logo

Authorized
Dealer

Guarantee SAFE Checkout

logo

Categories: All Products, Best Sellers, Brands, Katool,

Product Type:

Barcode:

Heavy-duty two-post design provides stable, symmetrical lifting for a wide range of vehicles. Rated for 15,000 lb capacity with a max lifting height of 72.83 in, it supports light trucks and large SUVs. Direct-drive hydraulic system delivers consistent, low-maintenance operation and efficient load handling. Single-point lock release enables fast, synchronized lowering for safe service procedures. 220V 60Hz 3 kW (4 HP) power unit offers ample torque for frequent shop use. Constructed from heavy-gauge steel and reinforced posts for long service life (estimated). Symmetric arm configuration simplifies vehicle centering and axle work without complex repositioning. Installation requires a minimum 5.9 in thick, 3000 PSI concrete pad and professional anchoring to meet safety parameters. Service technicians benefit from clear arm reach and robust locking increments for routine maintenance tasks. Documentation and basic installation hardware are provided to assist with shop integration.

*Concrete thickness must be at least 5.9” (150 MM) with a 3000 PSI rating. Failure to install this lift on the proper concrete, could result in serious injury or death! It is the customer’s responsibility to verify concrete thickness and strength before purchase and installation. 

Features

  • 15,000 lbs lifting capacity.
  • Max lifting height of 72.83".
  • Direct drive.
  • Symmetric.
  • Single point lock release.
  • 220V 60Hz 3KW 4HP

     

Specifications

Lifting capacity 15,000 lb
Maximum lifting height 72.83 in
Drive type Direct drive hydraulic
Motor / Power 220V 60Hz, 3 kW (4 HP)
Locking mechanism Single-point lock release
Symmetry Symmetric
Construction material Heavy-gauge steel (estimated)
Concrete requirement Minimum 5.9 in thickness, 3000 PSI concrete
Installation notes Floor-mounted with anchor bolts; professional installation recommended (estimated)
Included components Two posts, two lifting arms, hydraulic power unit, basic installation hardware and manual (estimated)

 

Warranty

Katool offers a limited one-year (12 months) warranty on all parts and against all product defects, free of charge.

A 2-year extended warranty plan is available for any Katool or M&E automotive equipment.

Warranty Includes:
- Cylinders, power units, motors, displays, electronics, etc.
- Vehicle lifts include an additional three-year (36 months) warranty on structural components only.

Warranty Conditions:
- Claims must fall within the warranty period.
- Warranty is non-transferable and requires the original order number and purchase from our company or a registered vendor.
- Replacement parts will be provided at no cost, including free shipping.

Note:
- All warranty claims are subject to approval by the warranty/service department.
- Photos and/or videos of defects may be requested.
- Do not disassemble any equipment before the issue is determined.
- Equipment outside the warranty policy will not be covered, and the buyer will be responsible for replacement parts and shipping costs.
- Labor is not included in the warranty.

Heavy-duty two-post design provides stable, symmetrical lifting for a wide range of vehicles. Rated for 15,000 lb capacity with a max lifting height of 72.83 in, it supports light trucks and large SUVs. Direct-drive hydraulic system delivers consistent, low-maintenance operation and efficient load handling. Single-point lock release enables fast, synchronized lowering for safe service procedures. 220V 60Hz 3 kW (4 HP) power unit offers ample torque for frequent shop use. Constructed from heavy-gauge steel and reinforced posts for long service life (estimated). Symmetric arm configuration simplifies vehicle centering and axle work without complex repositioning. Installation requires a minimum 5.9 in thick, 3000 PSI concrete pad and professional anchoring to meet safety parameters. Service technicians benefit from clear arm reach and robust locking increments for routine maintenance tasks. Documentation and basic installation hardware are provided to assist with shop integration.

*Concrete thickness must be at least 5.9” (150 MM) with a 3000 PSI rating. Failure to install this lift on the proper concrete, could result in serious injury or death! It is the customer’s responsibility to verify concrete thickness and strength before purchase and installation. 

Features

  • 15,000 lbs lifting capacity.
  • Max lifting height of 72.83".
  • Direct drive.
  • Symmetric.
  • Single point lock release.
  • 220V 60Hz 3KW 4HP

     

Specifications

Lifting capacity 15,000 lb
Maximum lifting height 72.83 in
Drive type Direct drive hydraulic
Motor / Power 220V 60Hz, 3 kW (4 HP)
Locking mechanism Single-point lock release
Symmetry Symmetric
Construction material Heavy-gauge steel (estimated)
Concrete requirement Minimum 5.9 in thickness, 3000 PSI concrete
Installation notes Floor-mounted with anchor bolts; professional installation recommended (estimated)
Included components Two posts, two lifting arms, hydraulic power unit, basic installation hardware and manual (estimated)

 

Warranty

Katool offers a limited one-year (12 months) warranty on all parts and against all product defects, free of charge.

A 2-year extended warranty plan is available for any Katool or M&E automotive equipment.

Warranty Includes:
- Cylinders, power units, motors, displays, electronics, etc.
- Vehicle lifts include an additional three-year (36 months) warranty on structural components only.

Warranty Conditions:
- Claims must fall within the warranty period.
- Warranty is non-transferable and requires the original order number and purchase from our company or a registered vendor.
- Replacement parts will be provided at no cost, including free shipping.

Note:
- All warranty claims are subject to approval by the warranty/service department.
- Photos and/or videos of defects may be requested.
- Do not disassemble any equipment before the issue is determined.
- Equipment outside the warranty policy will not be covered, and the buyer will be responsible for replacement parts and shipping costs.
- Labor is not included in the warranty.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)