in stock
Katool KT-T900 Tire Changer and KT-B700 Wheel Balancer Combo
over $250
100% Satisfaction
Guarantee
Authorized
Dealer
Guarantee SAFE Checkout
A fully hydraulic tire changer paired with a precision wheel balancer engineered for professional garages. The tire changer uses a stainless steel mounting head, lever-less operation and a top assist arm to reduce rim damage and speed service. Hydraulic and gearbox motors with copper windings deliver steady torque for removing and fitting low-profile and run-flat tires. A reinforced steel balancer frame and hardened shaft provide stable rotation and repeatable balance accuracy to ±1 g. Integrated air filtration and a moisture-resistant control board extend service life in busy shop environments. Intuitive assist devices and a wheel lift reduce manual handling and improve throughput for two-person or single-operator workflows. Units accommodate a wide wheel range and support large diameters and clamp sizes common to passenger and light-truck wheels. Components are finished for corrosion resistance and welded to minimise vibration during operation. Serviceable parts and accessible calibrations simplify routine maintenance and calibration tasks for technicians. The combo ships with mounting accessories, counterweights and manuals and integrates with standard 110–120V single-phase shop power.
Features:
KT-T900 Center Post Tire Changer
- All hydraulic power systems for working on all types of car wheels
- The built-in top assist arm allows you to change even difficult run-flat and low-profile tires
- Lever-less design. Stainless steel mounting head and included plastic cover for protecting the rim
- Wheel lift assistant device
- High-quality motor with pure copper winding to ensure low defect rate and longer life
- Top-level motor and pure copper winding provide more power faster heat dissipation, lower defect rate, and longer service life.
- High-quality filter
KT-B700 Wheel Balancer
- The body uses 3mm-thick steel with high strength, solid welding and low vibration
- All-in-one pressure sensor support design, both bottom and side boards are 8mm thick, and it insures that the sensor work stably with high precision
- Top level motor and pure copper winding provides more power, faster heat dissipation, lower defect rate and longer using life
- The 36mm shaft thread is made by quenching treatment to offer high strength
- The computer board adopts advanced welding technology to make it moisture proof, dust proof and antistatic
- Various balance mode for different types of rims to provide more precision
- Built-in fault diagnosis and self-calibration program with double side calibration. No preset parameters so the users can operate with ease
- Unit selection (Ounce/Gram, MM/Inch)
- High quality integration power board, working stable and reliable.
- Optional wheel guard
- Longer shaft also compatible with wider wheels
Specifications
KT-T900 Center Post Tire Changer
| Max wheel diameter: | 47" / 1200 mm |
| Max wheel width: | 16" / 406 mm |
| Wheel clamp: | 12"-30" |
| Power supply: | 110V / 1PH / 60HZ |
| Gear Box Motor power: | 1.5KW / 2HP |
| Hydraulic power: | 1.1KW / 1.5HP |
| Rotation speed: | 6.8r/min |
| Air Pressure: | 0.8-1.0Mpa(116-145psi) |
| Net weight: | 188KG / 414lbs |
KT-B700 Wheel Balancer
| Rim Diameter: | <30" |
| Wheel Width: | 3"-12" |
| Wheel Diameter: | <880mm/34.64" |
| Balancing Speed: | 180rpm |
| Power Supply: | 120V 1PH |
| Motor Power: | 0.25KW |
| Rim Center Hole Dia.: | <135mm/5.31" |
| Wheel Weight: | <65KG/143lbs |
| Balancing Accuracy: | ±1g |
| Measuring Time: | 7S |
Warranty
Katool offers a limited one-year (12 months) warranty on all parts and against all product defects, free of charge.
A 2-year extended warranty plan is available for any Katool or M&E automotive equipment.
Warranty Includes:
- Cylinders, power units, motors, displays, electronics, etc.
- Vehicle lifts include an additional three-year (36 months) warranty on structural components only.
Warranty Conditions:
- Claims must fall within the warranty period.
- Warranty is non-transferable and requires the original order number and purchase from our company or a registered vendor.
- Replacement parts will be provided at no cost, including free shipping.
Note:
- All warranty claims are subject to approval by the warranty/service department.
- Photos and/or videos of defects may be requested.
- Do not disassemble any equipment before the issue is determined.
- Equipment outside the warranty policy will not be covered, and the buyer will be responsible for replacement parts and shipping costs.
- Labor is not included in the warranty.
Manuals & Resources
Download the user manuals for both machines:
A fully hydraulic tire changer paired with a precision wheel balancer engineered for professional garages. The tire changer uses a stainless steel mounting head, lever-less operation and a top assist arm to reduce rim damage and speed service. Hydraulic and gearbox motors with copper windings deliver steady torque for removing and fitting low-profile and run-flat tires. A reinforced steel balancer frame and hardened shaft provide stable rotation and repeatable balance accuracy to ±1 g. Integrated air filtration and a moisture-resistant control board extend service life in busy shop environments. Intuitive assist devices and a wheel lift reduce manual handling and improve throughput for two-person or single-operator workflows. Units accommodate a wide wheel range and support large diameters and clamp sizes common to passenger and light-truck wheels. Components are finished for corrosion resistance and welded to minimise vibration during operation. Serviceable parts and accessible calibrations simplify routine maintenance and calibration tasks for technicians. The combo ships with mounting accessories, counterweights and manuals and integrates with standard 110–120V single-phase shop power.
Features:
KT-T900 Center Post Tire Changer
- All hydraulic power systems for working on all types of car wheels
- The built-in top assist arm allows you to change even difficult run-flat and low-profile tires
- Lever-less design. Stainless steel mounting head and included plastic cover for protecting the rim
- Wheel lift assistant device
- High-quality motor with pure copper winding to ensure low defect rate and longer life
- Top-level motor and pure copper winding provide more power faster heat dissipation, lower defect rate, and longer service life.
- High-quality filter
KT-B700 Wheel Balancer
- The body uses 3mm-thick steel with high strength, solid welding and low vibration
- All-in-one pressure sensor support design, both bottom and side boards are 8mm thick, and it insures that the sensor work stably with high precision
- Top level motor and pure copper winding provides more power, faster heat dissipation, lower defect rate and longer using life
- The 36mm shaft thread is made by quenching treatment to offer high strength
- The computer board adopts advanced welding technology to make it moisture proof, dust proof and antistatic
- Various balance mode for different types of rims to provide more precision
- Built-in fault diagnosis and self-calibration program with double side calibration. No preset parameters so the users can operate with ease
- Unit selection (Ounce/Gram, MM/Inch)
- High quality integration power board, working stable and reliable.
- Optional wheel guard
- Longer shaft also compatible with wider wheels
Specifications
KT-T900 Center Post Tire Changer
| Max wheel diameter: | 47" / 1200 mm |
| Max wheel width: | 16" / 406 mm |
| Wheel clamp: | 12"-30" |
| Power supply: | 110V / 1PH / 60HZ |
| Gear Box Motor power: | 1.5KW / 2HP |
| Hydraulic power: | 1.1KW / 1.5HP |
| Rotation speed: | 6.8r/min |
| Air Pressure: | 0.8-1.0Mpa(116-145psi) |
| Net weight: | 188KG / 414lbs |
KT-B700 Wheel Balancer
| Rim Diameter: | <30" |
| Wheel Width: | 3"-12" |
| Wheel Diameter: | <880mm/34.64" |
| Balancing Speed: | 180rpm |
| Power Supply: | 120V 1PH |
| Motor Power: | 0.25KW |
| Rim Center Hole Dia.: | <135mm/5.31" |
| Wheel Weight: | <65KG/143lbs |
| Balancing Accuracy: | ±1g |
| Measuring Time: | 7S |
Warranty
Katool offers a limited one-year (12 months) warranty on all parts and against all product defects, free of charge.
A 2-year extended warranty plan is available for any Katool or M&E automotive equipment.
Warranty Includes:
- Cylinders, power units, motors, displays, electronics, etc.
- Vehicle lifts include an additional three-year (36 months) warranty on structural components only.
Warranty Conditions:
- Claims must fall within the warranty period.
- Warranty is non-transferable and requires the original order number and purchase from our company or a registered vendor.
- Replacement parts will be provided at no cost, including free shipping.
Note:
- All warranty claims are subject to approval by the warranty/service department.
- Photos and/or videos of defects may be requested.
- Do not disassemble any equipment before the issue is determined.
- Equipment outside the warranty policy will not be covered, and the buyer will be responsible for replacement parts and shipping costs.
- Labor is not included in the warranty.
Manuals & Resources
Download the user manuals for both machines: